Got a freshly cleaned car or you just don't like touching that beautiful paint when closing the door? This is for you. I found myself trying to get a little leverage on the inside of the door jamb trying to close the door without touching the outside of the door. Trying to prevent fingerprints and smudges on the super clean paint or molding. The solution is our 3D printed door jamb pull. This provides just enough of a surface to push/pull against to close the door. Fit these to the inside of the door to give you a spot for a little leverage on the inside of the door edge to shut the door without touching the outside of the car.
These are 3D printed from ASA for its heat and UV resistance. They are 3D printed. So there will be layer lines and other marking just from the nature of the 3D printing process. They attach with 3M molding tape. Tape is already applied. I apply this by hand so there will be some difference from piece to piece on placement. But this won't affect the end result. Testing has proven these to be very well adhered to the door.
Each pull measures, 45mm x 25mm x 8.3mm. Please be sure you have at least 8.5mm clearance in your door jamb so they do not make contact with the body of the car.
This is ONLY the printed part.
Sold as a pair.
These are made to order so please allow 2-3 business days for processing.
